Board-to-board Connector Interface-embedded Module

Published:2014-09-25    浏览次数:392


Board-to-board connector interface-embedded module adopts standard 100PIN small-sized board-to-board connector interface mode to support broadband data, voice and trunking services simultaneously, and provide unified solutions for wireless voice, trunking and data. The module also provides transmitted power up to 1W with built-in high-power modules and integrates with devices like DAE, PAD, video surveillance and vehicle-mounted terminals. It boasts built-in TCP/IP protocol, AT command set and voice interface.


- Adopt standard 100PIN small-sized board-to-board connector interface mode, easy to integrate;
- Support broadband data, voice, trunking and other services;
- Built-in high-power module with transmitted power up to 1W;
- Provide various interfaces, including audio, UART, USB, etc.;
- Built-in TCP/IP protocol, available as a layer-3 device. IP address can be automatically obtained and connected;
- Built-in AT command set;
-Provide wake-up and waken-up control interface;
- Uplink and downlink maximum throughput of 1.6Mbps;
- Industrial-grade chip.

- Operation frequency: 1785MHz~1805MHz and 400MHz~430MHz;
- RF bandwidth: 1MHz;
- Maximum transmitted power: 30dBm (1800M frequency band), 33dBm (400M frequency band);
- Receiver sensitivity: -105dBm;
- Maximum transmission rate: 1.6 Mbps (two-way);
- Power consumption: 3.6W;
- Dimensions: 77mm×44mm×8.2mm;
- Operation temperature: -30℃~+60℃.



Copyright © Beijing Xinwei Technology Group. Co., Ltd. All rights reserved. Stock code: 600485